Pattern: Ozark Coat

Photo by: Joyce Eveler

Download this free pattern! (PDF 914kb)

Pattern: Ozark French Wrap

Photo by: Joyce Eveler

GAUGE: 3 sts. = 1”

MATERIALS:
4 skeins of Ozark Opulent in Black Sparkle
#17 needle

INSTRUCTIONS:
With a #19 needle cast on 1 st in Opulent. Increase one in the next st. Knit 2. Knitting every row, increase one st each side every third row. Repeat until there are 28 sts. Continue until it measures 60” or desired length.
For tab, cast on 8 sts and knit 4 rows. Bind off loosely.
Finishing: Try wrap on as shown in photo. It should cross over on the right or left side. Place tab lengthwise appropriate to where you want the crossover and sew each short end into place. To wear, pull the pointed end through the tab until wrap fits snugly around your shoulders.

Design by Carol Porter for Ozark Handspun, January, 2009

Printing Instructions: To print this pattern click Ozark_French_Wrap.pdf.

Pattern: Ozark Opulent Kimono

Photo by: Joyce Eveler

MATERIALS:
4 Ozark Opulent (shown in Cinderella)
2 Ozark Companion (shown in Purple Passion)
#15 circular needles

MEASUREMENTS
24” wide by 19” long
GAUGE 2 sts = 1’

INSTRUCTIONS:
Back:With #15 circular needles cast on 48 sts in Opulent. Knit back in Companion. For each row, go back to wherever the previous yarn is. Alternating the Companion and the Opulent, knit the purl rows and purl the knit rows. Before beginning the row it is helpful to pull down the yarn to see the previous row more clearly so you will know whether to knit or to purl. Continue for 10”. On a row with both yarns at the same place, (otherwise cut one and retie it on), Cast on 24 sts. Work across the row and then using the knit cast on method, cast on another 24 sts for a total of 96. Work another 9” and then bind off. (Alternatively you may place 41 sts on a holder, BO 14 sts, place 41 sts on a holder and knit the shoulders together after finishing the front.)
Front: Cast on 25 sts and knit following directions above for 10”. Cast on 24 sts and continue for 7”. Bind off 3 sts at neck edge, followed by 2 sts 2 times. Come as close as you can to every other row. You may have to cut your yarn and retie it on to make the decreases work because of the method used in this pattern, At 19” bind off. Repeat for other side reversing shaping. (Alternatively, knit 41 remaining sts together with the back.)
Finishing: With an #I crochet hook, double the Companion and single crochet, chain one around the entire jacket and sleeves, skipping sts as needed to keep tension correct. To tighten the neck skip every 3rd st. Check the crochet at this point. If the tension is okay, Change to an #H and a single strand of Companion. SC under the outer half of the previous SC, chain 1 as directed above. If you need to tighten the neck further, do it with this row.
Optional Flower: With the Companion, cast on 11 sts. Rows 1, 2, 5, and 6, knit. Rows 3 and 7, bind off 8 sts, knit to the end with 3 sts remaining. Row 4, knit 3 and use the knit method to cast on 8 sts. Repeat rows 4-7 25 more tines. BO all sts on row 7. Stack into a tight circle and baste in place. Thread a large needle with the opulent. Bring up through the back. Wind around needle 3-4 times and put needle through to the back for a French knot. Since the Opulent is so thick you may need to improvise a bit. Place on jacket, try it on and sew in place.

Designed by Carol Porter for Ozark Handspun, January, 2009

Printing Instructions: To print this pattern click Ozark_Opulent_Kimono_Jacket.pdf.

Pattern: Ozark Sublime Waves

Photo by: Joyce Eveler

Gauge: 2.25 sts = 1”

MATERIALS:
3 Skeins Ozark Opulent
3 Skeins Ozark Companion
1 Pair US Size 15 circular knitting needles

INSTRUCTIONS:
Sweater: Cast on 84 sts in Opulent with a #15 circular needle (alternatively 42 sts on a straight needle). Place marker at the beginning of the first row. Work one row in Companion followed by one row in Opulent. Knit the purl rows and purl the knit rows. Until you become accustomed to this pattern you may want to pull down the previous row a bit to see if it is a knit or a purl because sometimes the opulent may look like a purl when it is actually a knit.
At 4” work 8 sts, then knit or purl 2 tog.until the end of the row (76 sts).
At 8”. increase one st every 9th st 8 times (84 sts.) This decrease and increase may be omitted but it just gives a slight shaping to the sweater which is very flattering.
At 10”, work 42 sts and put on holder. With remaining 42 sts on needle, cast on 4 sts each side 4 times. This may involve some cutting and tying. Continue until sweater measures 19” and bind off loosely. Go back and pick up remaining 42 sts from the holder and repeat directions for the other side.
Waves: With #15 needle cast on 12 sts in Companion doubled. As dye lots may vary, it is important to start with one strand of the last of the Companion used in the sweater and one strand of a new skein. Add the third skein as you finish the first. Knit every row until you reach at least 75”-85”. You will need length to work the “waves”.
Finishing: Weave the underarms and the shoulders together. Mark the middle of the Wave and pin it to one shoulder seam. Play with placing the waves around the collar. Do this as irregularly as possible, angling some of the waves in a diagonal. Before you tack any in place, try the sweater on and make adjustments. Then simply tack the waves in place. Doing this as closely as possible to the bottom of the wave will help it to stand up.

Designed by Carol Porter for Ozark Handspun, January, 2009

Printing Instructions: To print this patter click Ozark_Sublime_Waves.pdf.

Pattern: Ozark Sublime Wave Purse

Finished Size: 16” x 22”

MATERIALS:
3 Skeins Ozark Opulent
1 Skein Ozark Companion
1 Pair US Size 15 circular knitting needles
13¼” x 22” plastic canvas (available at Michael’s)

INSTRUCTIONS:
Purse: With a #15 circular needle cast on 45 sts in Opulent. Purl one row in Companion. Continue in stockinette alternating one row each of Opulent and Companion until you have used all the Opulent. The purse should be about 32” long. Wash this piece in hot water to felt it. Pull to shape and lay flat to dry.
Wave: With a #15 needle, cast on 10 sts. Knit every row for about 38”. This should be about right for your waves, but you can certainly knit it longer if you prefer.
Finishing: Cut the plastic canvas so that it is just slightly shorter than the purse and 1” less wide on each side. Fold the purse to determine where you want the folds and mark them. Lay the plastic piece on the wrong side of the purse. Then place the felted piece so there is about 1” on each side of the plastic for the body of the purse, ½” for the flap. Sew the plastic to the felt all the way around. Sew the sides of the purse together to form the body, push to the inside of the purse forming a small tuck at the top so the flap folds over smoothly. Whipstitch the tuck.
Pin the wave in place. Do this as irregularly as possible with some waves being diagonal.
One thing to bear in mind is that this is an envelope purse and you want to be comfortable carrying it; so don’t place the wave too close to the edge of the flap. When you have the waves the way you want them, tack them in place. Cut lining to fit and sew in. Now wait for the compliments to roll in.

Design by Carol Porter for Ozark Handspun, January, 2009

Printing Instructions: To print this pattern click Ozark_Sublime_Wave_Purse.pdf.

Pattern: Ozark So Opulent Scarf

MATERIALS:
2 Skeins Ozark Opulent Yarn
1 Skein Ozark Companion Yarn
1 Pair US Size 17 circular knitting needles

INSTRUCTIONS:
Cast on 12 sts in Opulent on a #17 needle. Purl the next row in Companion. Continue to alternate the two yarns and knitting purl rows and purling knit rows. Continue for at least 60”. You will have enough Opulent to make it longer if you want.

Knitting Tip: Until you become accustomed to this pattern, you may want to pull down the previous row a bit to see if it is a knit or a purl row because sometimes the Opulent may hide the row to make it look like a purl when it is actually a knit.

Designed by Carol Porter for Ozark Handspun, January, 2009

Printing Instructions: To print this pattern click Ozark_So_Opulent_Scarf.pdf.

Pattern: Ozark Feather Vest

Photo by: Joyce Eveler

MATERIALS:
3 skeins of Ozark Opulent in Overblack, Dark Natural, and Light Natural
1 Pair US Size 19 knitting needles
Natural feathers (2-3”long)

INSTRUCTIONS:
With a #19 needle cast on 62 sts. in Overblack. Knit every row until skein is finished and then tie on the skein of Dk Natural followed by the Light Natural. Knit for 10.5”. Knit 16 sts. and put on holder. Knit remaining 46 sts. Put last 16 sts. on holder. Cut yarn and tie on to the middle 30 sts (the back). Bind off 2 sts each side, followed by 1 st each side. Knit for a total of 19”. Bind off loosely. Tie yarn on to one side of the front and bind off 2 sts , followed by one st at armhole edge. At 17” , bind off 3 sts at neck edge, followed by 2 sts. twice (6 sts.)
Finishing:
Crochet around neck edge and armholes to tighten them up slightly.
Feathers are available from the Feather Place, 213-291-3253, tfpla@featherplace.com. Use 2”-3” natural brown feathers and glue the darkest ones in the Overblack, the medium brown ones in the Dk Natural, and the lightest in the Lt Natural. The feathers may be glued in place with Aleene’s Fabric Fusion Glue. Hold each in place to let the glue dry for a minute. If you cannot find feathers this short, you can cut them to get the length you like.

Designed by Carol Porter for Ozark Handspun, January, 2009

Printing Instructions: To print this pattern click Ozark_Feather_Vest.pdf.

Pattern: Ozark Bullet Proof Baby

Photo by: Joyce Eveler

MATERIALS:
4 Skeins Ozark Companion Yarn (shown in Acorn)
4 Skeins Ozark Opulent Yarn (shown in Bulletproof)
1 Pair US Size 13 Knitting needles
1 Pair US Size 19 Knitting needles

MEASUREMENTS
20” wide by 21” long
GAUGE 2.75=1” in Ozark Companion

INSTRUCTIONS:
Back: With a #13 needle, cast on 63 sts with the Ozark Companion doubled. Work in rib as follows:
RS: K3 *P1, K3* to end of row.
WS: K1, *P1, K3*, P1, K1 to end of row. (Pattern is a multiple of 4 plus 3.)
At 12 1/2”, decrease 8 sts each side. Continue until sweater measures a total of 21”. BO loosely.
Front: With a #13 needle, cast on 32 sts with the Companion doubled. Work as above. At 19 ½”, BO 4 sts, followed by 3 sts twice on every other row at neck edge.. At 21”, BO the remaining 14 sts. Repeat for other side, reversing shaping.
Sleeves: On a #19 needle, cast on 20 sts.with Opulent. Knit every row for 16” BO loosely. Cut remaining Opulent into 5”-6” pieces and tie on thickly. I do every st.
Finishing: Weave together shoulder seams. Sew tops of sleeves to shoulder. Weave together side seams and sleeve seams. I like the clean edges of this jacket; so I did not finish the edges or add buttons.

Designed by Carol Porter for Ozark Handspun, January, 2009

Printing Instructions: To print this pattern click Ozark_Bullet_Proof_Baby.pdf.

Pattern: Ozark Rocker

Photo by: Joyce Eveler

Sizes: Small (Medium, Large, Extra-Large)

MATERIALS:
3 skeins Ozark Handspun Opulent in complimentary colors
1 skein Ozark Handspun Companion in complimentary colors
1 pair US Size 19, 24 inch circular knitting needles
1 pair US Size 17, 24 inch circular knitting needles
1 pair US Size 10 or 10.5, 24 inch circular knitting needles
1 Tapestry Needle
1 Large Button or Closure

INSTRUCTIONS:
Using US Size 19 needles and Ozark Opulent color, cast on 64 (69, 74, 80) stitches.
Row 1: Using US Size 19 needles, knit.
Row 2: Knit.
Row 3: Switch to US Size 17 knitting needles, knit.
Row 4: Switch to Ozark Companion and knit.
Row 5: Knit.
Repeat rows 2-5 using Ozark Opulent and Ozark Companion to achieve 7 repeats. Last row will end with Ozark Companion.
Switch to US Size 10 or 10.5 needles and staying with Ozark Companion, knit one row.
Next row: Knit 5 stitches, purl 54 (59, 64, 70) stitches, knit last 5 stitches. Repeat for 15.5 (16, 16.5, 17) inches.
Switch to US Size 17 needles and repeat rows 2-5 (above) ending with Ozark Opulent to achieve the same 7 color changes as in the beginning.
Switch to US Size 19 needles and knit one row, cast off loosely.
Finishing: Fold garment in half from top to bottom. Using Ozark Opulent and tapestry needle sew Opulent/Companion rows together on each side.
Sew button on left side 3 inches in at the seam.

Designed by David Gentzsch, October 2008

Printing Instructions: To print this pattern click Ozark_Rocker.pdf.

Pattern: Ozark Not So Mad Max

Photo by: Joyce Eveler

Tap into your untamed side with these boot cut leg warmers. Feeling extra fiery? Wear them on your arms and let your inner wild child come out to play!

MATERIALS:
2 skeins Ozark Companion
1 skein Ozark Opulent
Set of 5 DPNs, size 10
Tapestry needle
Crochet hook size I

INSTRUCTIONS: (Make 2)
Using Ozark Companion CO 48s (12 on each needle) Join for knitting in the round
r 1-6: *(k4, p4,) rpt from *
r 7: * (yo, k2tog, k2, yo, p2tog, p2,) rpt from *
r 8-13: * (k4, p4) rpt from *
r 14 – 19: k5, p2, *(k6, p2), rpt from * to last s, k1
r 20-31: k
r 32: *(k1, m1, k11) rpt from *
r 33 – 42: k
r 43: *(k1, m1, k12), rpt from *
r 44-49: k
r 50: *(k1, m1, k13), rpt from *
r 51-55: k
r 56: *(k1, m1, k14), rpt from *
r 57- 61: k
r 62: *(k1, m1, k15), rpt from *
r 63- 67: k
BO
Weave in loose ends
Finishing: (for each warmer) Using Ozark Opulent cut 3 lengths of Ozark Opulent, 1 yard each
Weave all three strands through the holes made in row 7, tie on side.
Cut Ozark Opulent fringe 5 ½ inches long.
Using crochet hook, attach 2 strands of fringe to every 3rd stitch of the BO edge.
With Ozark Companion on your tapestry needle, stitch 2nd row of fringe on in the following manner 6 rows above the BO edge: Holding fringe lengthways, stitch on piece of fringe in the middle. Then fold the top ½ of fringe back down over the stitch and stitch again. Each piece of fringe will be double stitched in order to ensure security. Fringe ends up being about 2 ½ inches long doubled in this manner. Repeat around the entire warmer.

Designed by Sarah Kohl for Ozark Handspun, November 2008

Printing Instructions: To print this pattern, please click here Ozark Not So Mad Max.pdf

Pattern: Ozark Not Your Grandma's Carpet Bag

Carpet Bags have been around about as long as carpets. As the years have gone by, the style has remained but the material has changed. Ozark Opulent and Ozark Companion bring this classic style into the NOW with variegated colors and sculptured looking detail.

MATERIALS:
2 skeins Ozark Companion
1 skein Ozark Opulent
10 ½ circular needles (20 inch)
stitch holder or string
Stitch marker
Size N crochet hook
2 12 inch wooden handles
Tapestry needle

INSTRUCTIONS:
Working with 2 strands of Ozark Companion doubled, CO 60s
K 10 rows (g st)
P 1 row
PU 72 s around the base (6s side, 60s back, 6s side) You now have 132s on needle
PM and join for knitting in the round
K 2 rnds even
Break off 1 strand of yarn (remaining knitting will be done with one strand)
K in sts (knit all rnds) until you’ve used 1 skein, join 2nd skein
K 1 rnd
*k11, k2tog, repeat from * to end of rnd
k 5 rnds even
*k10, k2tog, repeat to end of rnd
k 5 rnds – this is the end of knitting in the round
k 51s and place on holder or string
BO 4
K 55 s, turn work
BO 4 s
K 10 rows and BO
Return to the 60 s on holder, place on needle
K 10 rows and BO
Weave in all loose ends.
(You will have left over Ozark Companion yarn. Save it for finishing work)
Felting/Fulling: Place piece in a cotton pillow case and pin closed. Place in washing machine with a pair of color fast jeans (adds friction). Set machine on low water setting and add a tiny bit of soap. Wash for 5 minutes using the hottest water and fastest agitation possible. Pull piece out and check it for sizing. This is a very hands on process as you’ll need to check the piece frequently (every couple of minutes) to make sure you get it the right size. You’ll only be lightly felting / fulling the bag, so it will only take about 8 – 10 minutes, but CHECK IT OFTEN! Machines are variable and so are felting times. When it’s the right size (I use the base of wooden handles as a sizing guide,) pin it back up in the pillow case and turn machine to the spin cycle and spin all the water out. Block to shape and air dry.
Finishing: Using tapestry needle and remaining Ozark Companion, stitch on wooden handles. Reserve approximately 3 yards of Ozark Companion for stitching on Ozark Opulent.
Using Ozark Opulent, crochet a single chain to desired length. This chain is the decorative pattern on the bag, so the more decoration you want, the longer your chain should be. I used about 2/3 of the skein of Ozark Opulent.
Lay chain out in a random pattern on the bag.
Using the Ozark Companion remaining from knitting the bag and the tapestry needle, tack the chain onto the bag (tacking down every other “link” of the chain.)

designed by Sarah Kohl for Ozark Handspun, November 2008

Printing Instructions: To print this pattern, click this link Ozark Not Your Grandmas Carpet Bag.pdf.

Pattern: Ozark Hip Shaker Supreme

Description: Life is too short to not shake things up every now and then. HipShaker Supreme is designed to do just that. Worn low on the hips, this lightly felted and heavily fringed hip skirt can be worn over jeans, yoga pants, skirts, or leggings.

Sizes: S (M, L)Size S shown

MATERIALS:
2 (2, 3)skeins Ozark Companion
1 (2, 2) skein Ozark Opulent
size 10 ½ needles (straight or circular)
size 15 needles
tapestry needle
2 1 ½ inch D rings

INSTRUCTIONS:
Body: Using 10 ½ needles, CO 138s (161, 184)
K 4 rows (g st)
Row 5: sl 1, k to end of row
Row 6: sl 1, p to end of row
Repeat rows 5 & 6 until piece measures 6” from CO (St st, slipping 1s on each row – this is the pattern)
*k 21, k2tog, repeat from * to end
k 5 rows in patt (St st, slipping 1s on each row)
*k 20, k2tog, repeat from * to end
k 5 rows in patt
*k 19, k2tog, repeat from * to end
k 5 rows in patt
*k 18, k2tog, repeat from * to end
k 5 rows in patt
*k 17, k2tog, repeat from * to end
k 5 rows in patt
*k 16, k2tog, repeat from * to end
k 5 rows in patt
K 5 (8, 11) rows, BO.
Weave in loose ends.
Belt: Using Ozark Companion and Ozark Opulent together, CO 4s on size 15 needles
K in g st (k all rows) until piece is 40” (43, 46) long.
BO.
Felting / Fulling directions: Place both pieces (body and belt) in a cotton pillow case and pin closedPlace in washing machine with a pair of color fast jeans (adds friction)
Set machine on low water setting and add a tiny bit of soap
Wash for 5 minutes using the hottest water and fastest agitation possible
Pull pieces out and check it for sizing. This is a very hands on process as you’ll need to check the pieces frequently (every couple of minutes) to make sure you get it the desired size. You’ll only be lightly felting / fulling the piece, so it will only take about 8 – 10 minutes, but CHECK IT OFTEN! Machines are variable and so are felting times. It’s better to stop the process too soon than too late.
When pieces are the desired size, pin pieces back up in the pillow case and turn machine to the spin cycle and spin all the water out.
Block to shape and air dry.
Finishing:
Cut remaining Ozark Opulent into 5 ¼” pieces for fringe
Stitch on each piece of fringe with Ozark Companion and tapestry needle in the following method:
Holding fringe perpendicular to the skirt, stitch on piece of fringe in the middle (1/2 off skirt, ½ on.) Then fold the top ½ of fringe back down and stitch again. Each piece of fringe will be double stitched in order to ensure security. Fringe ends up being about 2 ½ inches long doubled in this manner.
Using Ozark Companion and a tapestry needle, use a blanket stitch to sew belt to the top of the skirt. Each blanket stitch should be about ¼ inch long. Belt should be off center, 3 inches beyond edge of skirt on one side with a long tail on the other end.
Slip both D rings onto the short end of the belt, double the belt back and stitch in place.

designed by Sarah Kohl for Ozark Handspun, November 2008

Printing Instructions: To print this pattern, click this link Ozark HipShaker Supreme.pdf.

Pattern: Ozark Pumpkin Bag

Description: This fun felted bag is shaped like a giant pumpkin and is wonderful as a project bag or even a whimsical diaper bag for the young mother. it is a fun knit and felts easily. It can be embellished in many different ways including the way this version is done with a piece of Ozark Mane, feathers and Raku button.
Abbreviations: CO=cast on; BO=bind off; sts=stitches; k=knit; p=purl; kfb=knit if front and back; PM=place marker; SM=slip marker; k2tog=knit 2 together; ssk= slip, slip, knit); M=make knit stitch
Gauge: 3 1/2 - 4 1/2 sts approximately per inch using size US 13 32 inch circular needles.

MATERIALS:

7 Skeins of Reynolds Original Lopi, 100% Icelandic Wool, 100g=approx. 110 yds.

1 Pair US Size 13-3 inch circular needles

1 US Size J crochet hook

1 Ozark Mane

Feathers

Raku button

Tapestry needle

6 Stitch markers (one of a different color for beginning of row.)

INSTRUCTIONS:

Using Us Size 13 circular knitting needles and single strand of Lopi yarn, CO 26 sts.

(WS) Row 1: K13 sts, PM, k13 sts. Note: bottom of bag will be done in garter stitch.

(RS) Row 2: Kfb, knit until one st remains, kfb.

Row 3: Knit.

Rows 4,6,8,10,12,14,16,18: Kfb, knit to last st, kfb.

Rows 5,7,9,11,13,15,17,19: knit. Note: You should have 43 sts on needles when row 19 is complete.

Row 20: K2tog, knit to last 2 sts, ssk.

Row 21: Knit.

Rows 22,24,26,28,30,32,34,36: K2tog, knit to last 2 sts, ssk.

Rows 23,25,27,29,31,33,35,37: Knit. Note: At this point, you should have 26 sts on needles.

Row 38: Pick up and k17 PM; pick up and k17 sts, PM; pick up and k26 sts, PM; pick up and k17 sts, PM; pick up and k17 sts, PM; pick up and knit 26 sts, PM (different color as this is beginning of row marker.

Rows 39-41: Knit.

Row 42: *K1, M1, repeat from * to end of row. (258 sts)

Row 43: Knit.

Row 44: *K5, M1, repeat from * to end of row. (303 sts)

Row 45: Knit.

R0w 46: *K10, M1, repeat from * to end of row. (326 sts)

Rows 47-56: Knit.

Row 57: *K5, k2tog, repeat from * to end of row.

Rows 58-62: Knit.

Row 63: *K1, k2tog, repeat from * to end of row. (166 sts)

Rows 64-68: Knit. Note: At this point, if you require more decreases, do so randomly, resulting in a total of 102 sts on your needles at end of row.

For next six rows, alternate one row of knit and one row of purl.

Flap: Row 1: K66 sts; BO 36 sts loosely.

Row 2: Purl.

Row 3: K2tog, knit to last two sts, ssk.

Row 4. Purl.

Repeat rows 3 and 4 alternately until flap measures about 7 or 8 inches depending on your preference. BO loosely, cut yarn and fasten off, burying ends.

Straps: CO 9 sts and knit I-cord in usual fashion measuring about 36 inches long. Make three of these I-cords. When complete, braid together loosely and sew together at the ends. Set Aside.

Next, using the US size J crochet hook, attach yarn at side of bag where flap and forward part of bag come together, chain 10 and attach creating a loop. Repeat on the other side. Now, using tapestry needle, place I-cord braid through the loop and sew in place. Repeat on other side.

Felting (Fulling): At this point, wet bag thoroughly and squirt a bit of soap on the bag, placing into a lingerie bag and then put into the washer set on lowest setting ad warmest water. Allow to agitate, checking frequently and make sure not to allow to go through all the cycles. When felting process looks the way you like, remove, rinse thoroughly and squeeze excess water from bag with towels (do not wring) and then fill with towels to hold shape and allow to dry.

FINISHING: The flap can now be embellished using Ozark Mane or Ozark Handspun yarns and feathers to create a dramatic effect. Flap embellishment suggestions include needlefelting handspun yarns, buttons and whatever strikes your imagination.

designed by Janice Rosema for Ozark Handspun December 2007

Printing Instructions: To print this pattern, click Ozark Great Pumpkin Bag.pdf.

Pattern: Ozark Circle Purse

MATERIALS:
3 Skeins Ozark Handspun Opulent or Yarn
1 Bag Ozark Brambles
1/2 yard Ozark Felted Fabric
1 Bone Bead (minimum 1 inch)
1 Pair leather handles
1 10 inch zipper
1/2 yard fabric
1 Pair US Size 17 knitting needles
1 US Size **********crochet hook
Stitch holders
1 Tapestry needle
Thread
Trim Yarn
Optional: 1 Muench leather flower

INSTRUCTIONS:
*Using Ozark Handspun and US size ************ crochet hook, ch 6, sl st to form ring.
Row 1: Sc 12 sts into ring.
Row 2: 2 sc into each st.
Repeat row 2 until piece measures 9 inches in diameter. Cast off.
Repeat from * to make a second piece.
Side Vents: Using Ozark Handspun and US Size 17 knitting needles, cast on 8 sts. Knit for 20 inches.******************
Next row: Knit 4 stitches. Place stitch holder on remaining 4 stitches.
Knit for 10 inches. Bind off. (This is the opening for the zipper.)
Pick up stitches on stitch holder. Knit 4 stitches. Knit for 10 inches. Bind off.
Sew to the beginning of the vent creating a circle.
Finishing: Using Ozark Handspun, US Size ************* crochet hook, one round piece and the vent, sc 3, dc 3 in the next stitch around each circle to attach to each side of the vent. Bind off. Repeat for other side. You now have a circle in the back and a circle in the front of the purse. Using a back stitch and the needle and thread attach the zipper to the openig in the vent. Place your leather handles at the op of each circle. They should be in the center of the zipper opening.
Lining: Cut out two circles with a 10 inch diameter. This allows a half inch seam on the edge. Cut a piece of fabric 5 inch by 30 inches. Seam the bottom of the strip, fold it in half and cut an 11 inch strip in the center (this is where you will place it over the zipper in your bag.) Slip stitch it in place. Sew the edges of the curcle to the strip using a half inch seam allowance. If you do this by hand, use a back stitch. Place the lining inside the purse (remember to put the wrong side of the lining and wrong side of the purse together.) Position the zipper opening of the lining over the zipper and back stitch in place.
Embellishments: On the front side of the purse, make a center ring with the trim yarn using the US size ************* crochet hook, ch8, then 16 sc into the ring. Sew in the ceter of the bag. Using Ozark Brambles and the crochet hook, weave the Brambles on the front of the bag. Tug them to make sure they are secure. Position the feathers on one side of the ring and sew the leather flower in place. Attach the bead to the zipper pull. Make a pom-pom and attach to the bead.

Designer notes: this bag lends itself to many different emellishments. Just have fun! You can use buttons, beads, flowers or anything that pleases you to finish this. You can also leave it plain or add a cell phone pocket.

designed by L. Leslie Designs for Ozark Handspun, October 2008

Printing Instructions: To print this pattern, click Ozark_Circle_Purse.pdf.

Pattern: Ozark Danish Shawl

This shawl was inspired by the project: Traditional Danish Tie-Shawls in Spin-Off Magazine’s Spring 2008 issue.

MATERIALS:
10-15 Skeins Ozark Handspun Opulent in 3 coordinating colors
1 Set US Size 10 Knitting Needles
1 US Size L or larger Crochet Hook
Row Markers

Gauge: 8 stitches per 4 inches; 16 rows per 4 inches

Size Chart: X Large 160 rows; Large 144 rows; Medium 128 rows; Small 112 rows

Notes: This piece is started in the center and worked in one piece in garter stitch. Increase every other row creating two triangles with 3 stitches as the center point. It is best to mark the right side. Slip-stitch the first stitch on every row. The border is a single crochet around the entire shawl. Yarn over increase occurs on the right side on every other row. Increase two times at the beginning of the row after the third stitch, two times in the middle either side of the 3 center stitches and two times at the end of the row before the last 3 stitches. Yarn-overs are knitted through the back loop on the wrong side on both edges of the shawl. Yarn-over increases create a vertical row of holes down the middle of the shawl on either side of the three center stitches. The size of the shawl is determined by the number of rows with the gauge depending upon how long you desire the back.

INSTRUCTIONS:
Cast on 7 stitches. Knit 3 rows garter stitch.
Row 4: Knit 1, yarn over, knit 1, yarn over, place marker, knit 3, yarn over, knit 1, yarn over, knit 1.
Row 5: Slip first stitch, knit.
Row 6: Knit 2, yarn over, knit 1, yarn over, knit 3, yarn over, knit 1, yarn over, knit 2.
Row 7: Slip first stitch, knit.
Row 8: Knit 3, yarn over, knit 1, yarn over, place marker, knit 3, yarn over, knit 1, yarn over, knit 3.
Row 9: Slip first stitch, knit.
Row 10: Knit 3, yarn over, knit 1, yarn over, knit 1, yarn over, palce marker, knit 3, yarn over, knit 1, yarn over, knit 1, yarn over, knit 3.
Row 11: Slip first stitch, knit.
Row 12: Knit 3, yarn over, knit 1, yarn over, knit 1, yarn over, palce marker, knit 3, yarn over, knit 1, yarn over, knit 1, yarn over, knit 3.
Row 13: Slip first stitch, knit.
Repeat rows 12 and 13 until the desired size/length is reached.
Note: Be sure to yarn over on the right side of your work. Yarn-overs are knitted through the back loop on the wrong side on both edges of the shawl.
Finishing: Single crochet around the entire edge of the shawl.Ties: Cut yarn into 12-20 inch lengths. Braid 6 strands together and tie off at one end, tie onto shawl with the free end.

Adapted by Pat Hebert for Ozark Handspun, May 2008

Printing Instructions: To print click Ozark Danish Shawl.

Pattern: McKenzie's Swing Coat

This simple top-down raglan style design suits all ages. Be Creative! Have fun with color!

For approximate measurements and yarn requirements, please refer to sizing chart at end of pattern.

Size: Child Sizes: 2 (4,6,8,10); Adult Sizes: 4 (6,8,10,12,14,16,18,20)

Yarns: Yarn by Ozark Handspun - 34 yds; Bulk Weight yarn to obtain gauge such as: Bear Creek by Kraemer Yarns; Burly Spun by Brown Sheep; or Magnum by Cascade Yarns

MATERIALS:

1 set US size 17--24 inch or longer circular knitting needles

1 set US size 17--16 inch circular knitting needles for sleeves if worked in the round

1 US size J or K crochet hook

Stitch Markers and Stitch Holders

3--8 Odd Ball Buttons measuring between 5/8 and 1 1/4 inches

Gauge: 2 stitches per inch on size 17 needle or size to obtain gauge

Techniques you will use in this pattern and additional pattern notes: Garment is raglan style worked top down, back and forth in stst (knit 1 row, purl 1 row) throughout on a circular needle.

Crochet Picot Edge=*2 sc, ch 3, sl st in 1st ch; repeat from * to end.

Increase=M1L&M1R or you can use any increase method you want.

Knit Picot Bind Off=BO 2 sts, *slip st back from right hand needle to left hand needle, use cable cast on method, cast on 3 sts, then BO 5 sts; repeat from * to end of row. BO last st.

Loop Stitch Row=*K1, leaving stitch on left needle; bring yarn to front between needles; wrap around left thumb; move yarn to back between needles; knit the stitch again; slip stitch from left needle to right needle; lift 2nd stitch on right needle over last stitch worked as if to BO. Repeat from * across row.

Garment can easily be altered: garment length, degree of the swing, sleeve width and length or use of yarn throughout.

Abbreviations: BO=bind off; Ch=chain; CO=cast on; K=knit; K2tog=knit 2 together; MC=main color; M1L=make one left; M1R=make one right; pm=place marker; P=purl; rm=remove marker; sc=single crochet; st st=slip stitch; sm=slip marker; SSK=slip slip knit; st(s)=stitch(es); stst=stockinette stitch

INSTRUCTIONS:

To begin: Refer to sizing chart for number of CO sts.

For Size:__ CO __ sts. Do not join in the round.

Set Up Row (RS): Refer to sizing chart for number of back & sleeve sts. K1, pm, K1 (seam st), pm, K____ (sleeve sts), pm, K1 (seam st), pm, K_____ (back sts), pm, k1 (seam st), pm, K_____ (sleeve sts), pm, K1 (seam st), pm, K1. Turn and work one purl row. (WS)

Yoke: Working back and forth in stst, inc 8 sts on each RS row using the Yoke Increase until armhole measures from neckline to underarm or to desired length.

Yoke Increase Row (RS): *K to marker, M1L, sm, K1 (seam st), sm, M1R*; repeat from * to * to end of row.

Once armhole measures desired length, on a RS row, knit front panel sts to marker, rm, K1 (seam st), sm, (represents the center side seam), slip sleeve sts onto a st holder, rm, K1, rm, K back sts up to next marker, rm, K1, rm, sl 2nd sleeve sts onto another st holder, sm (center side seam), K1 rm, K to end. The seam sts are now part of your bodice. Turn and purl one row. (WS)

For Child Sizes: Continue working back and forth, increasing 4 sts on each RS row following the Bodice Increase until piece measures pattern or desired length less 2 1/2 inches.

For Adult Sizes: Work in stst for approximately 4 inches or desired length and at the same time shape the back. To Shape Back: Divide number of sts for back (between side seam markers) by 3. You may end up with an odd number of sts. Simply add the extra st(s) to the center of back. Example: 14, 15, 14. Work 1/3 of sts for back, pm, SSK. Work the next 1/3 less two sts, K2tog, pm. Decrease after & before markers on next 2-4 RS rows. Once garment measures 4 inches from underarm, increase on RS every 4th row using the Bodice Increase until piece measures pattern length or desired length less 2 1/2 inches.

Bodice Increase Row (RS): *K to marker, M1L, sm, M1R*; repeat from * to * to end of row.

Ozark Trim: Join in Ozark and work in stst for 2 inches, ending with a WS row.

Picot Bind Off: Join in MC or a contrasting color as an accent yarn. RS row: BO2, *slip st from right needle to left needle, CO 3 sts using cable cast on method, BO5; repeat * to end. BO last st.

Sleeves: Slip sleeve sts from holder onto needle. Work back and forth in stst until piece measures desired sleeve length less 2 1/2 inches. If working in the round, pick up 3 sts along underarm to eliminate the armhole opening.

For a narrow, dec 1 st at beginning and end of RS row or on either side of center seam st. Join in Ozark yarn and work in stst for 2 inches ending with a WS row. Join in MC or accent yarn, repeat Picot Bind Off as for body.

Right Side Button Band: Right side band is slightly wider than left side band. Using Ozark yarn and with RS facing, pick p and knit 1 st every other row along the front right panel starting at the hem. Work in stst for 2 inches or to desired width ready for a RS row.

Crochet Picot Bind Off: Working around the base of the button band, insert crochet hook and join in MC or accent yarn with sl st where Picot ends for hemline. *2 sc, che, sl st into 1st chain of ch3*, repeat from * to * to first st on left needle. at 1st st on needle, using hook, slip st knitwise off needle and work as part of a sc. Continue to work Picot Bind off, working 1 st at a time off the needle.

Left Side Button Band: Using Ozark, MC or contrasting color and with RS facing, pick up and knit 1 st every other row along the front left panel starting at the neckline edge. Work in stst for 2 inches or desired width ready for a RS row. Using MC or contrasting color, repeat the crochet Picot Bind off.

Finishing: Sew sleeve seams using mattress seam. Place buttons randomly down left button band and fasten.

With crochet hook, and beginning at the upper corner of the right button band, *2 sc, ch3, st st in 1st ch; repeat from * to end of neckline. Fasten off. If adding the full collar, work picot edging along the tops of the button bands.

Optional Full Collar: With RS facing, pick up & K around neckline for collar. Work the loop sts row for approximately 6-8 rows or desired fullness. BO loosely with MC. Tack collar in place to even distribute the weight of the collar.

Loop Stitch Row: *K1, leaving stitch on left needle; bring yarn to front between needles; wrap around left thumb; move yarn to back between needles; knit the stitch again; slip stitch from left needle to right needle; lift 2nd stitch on right needle over last stitch worked as if to BO. Repeat from * across row.

Size --Coat ---CO --Front --Sleeve --Back ----MC ------Ozark ------Ozark

------Length ------& Back ------------------Approx. ---Approx. ----Add for

------inches -------Panel ------------------Yds/skein -Yds/skein --Full Collar
2t ----18 -----18 ----1 --------2 ------8 ----236/2 -------34/1 -------2
4t ----19 -----18 ----1 -------2 -------8 ----280/2 -------34/1 -------2
6 -----20 ----24 ----1 -------4 ------10 ----300/2 -------34/1 -------2
8 -----22 -----24 ---1 -------4 ------10 ----347/3 -------68/2 -------3
10 ---24 -----26 ----1 -------4 ------12 ----394/3 -------68/2 -------3
Adult Sizes
4 ----26 -----26 ----1 -------4 ------12 -----449/4 -------68/2 ------3
6 ----28 -----26 ----1 -------4 ------12 -----556/4 ------102/3 ------3
8 ----29 -----26 ----1 -------4 ------12 -----599/5 -----102/3 -------3
10 --30 ------26 ----1 ------4 -------12 -----662/5 -----102/3 ------3
12 ---31 -----28 ----1 ------4 -------14 -----678/5 -----102/3 -------3
14 ---32 -----28 ----1 ------4 -------14 -----727/6 -----136/4 -------3
16 ---33 -----28 ----1 ------4 -------14 -----786/6 -----136/4 -------3
18 ---34 -----28 ----1 ------4 -------14 -----815/6 -----136/4 -------3
20 --34 ------34 ----1 ------6 -------16 -----850/7 -----136/4 -------3

Select a size on the smaller side as this garment will stretch some.

These amounts are estimates only.

Allow additional yardage if enlarging pattern in any way.

Due to the nature & variance in color of Ozark Handspun yarns, it is strongly recommended to purchase enough skeins of the same yarn at the same time as each batch is truly unique and no two skeins are alike.

Due to the approximate yards of Ozark Handspun yarns of 34 yards, you may want to purchase an additional skein of yarn, just so you do not run short.

designed by Donna Higgins, In the Making, LLC, http://www.shopknits.com/, 2006

Printing Instructions: To print click McKenzie's Swing Coat.

Pattern: Ozark Circle Jacket

Sizes: Small (medium, large)

Finished Bust: 36 inches (38,40)

MATERIALS:

5 Skeins Ozark Handspun Opulent, 50 yds/100g

3 Skeins Tahki Donegal Tweed worsted weight, 183 yds/100g (three different colors if desired)

1 US size10 24 inch circular knitting needles

1 US size 10 47 inch circular knitting needles

1 US size 10 double pointed knitting needles (DPN)

1 US size N crochet hook

stitch markers

waste yarn

Note: To create larger sizes, measure your shoulder width across the back and divide by two. this will be the measurement needed before establishing armholes using waste yarn. For example, if your back measures 22 inches (or whatever your measurement is) from armhole to armhole, work to 11 inches (or whatever your measurement is) from the center and then shape armholes. Continue circle, increasing as previously until piece measures 22 inches (or whatever your measurement is) from the center. When binding off, do so loosely.
This circular vest is worked from the center, beginning with the use of DPNs and changing to longer circular needles as required. If making a larger vest, you may need a 60 inch long size 10 circular needle to accommodate all stitches on needles.

Increases: increase 1 knitwise or increase 1 purlwise

Abbreviations: CO=cast on; BO=bind off; k=knit; p=purl; inc=increase; dec=decrease; DPN=double pointed needles; sts=stitches; pm=place marker; sm=slip marker.

INSTRUCTIONS:

Using size 10 DPNs, CO 8 sts on one of the DPNs.

Rnd 1: K in front and back of every st-16. Divide onto four needles. Join, being careful not to twist sts and pm (this will be beginning of round marker so make sure it is of a different color than other markers used.)

Rnd 2: *k1, inc1 k st, repeat from * resulting in 6 sts per needle.

Rnd 3: Knit to end of rnd.

Rnd 4: *k1, inc1, repeat from * to end of rnd - 9 sts per needle.

Rnd 5: Knit to end of rnd.

Rnd 6: *K1, inc1, repeat from * to end of rnd - 12 sts per needle.

Rnd 7: Knit, placing a marker every 6th st. Each needle will have two sections.

Rnd 8: *K1, inc1, repeat from * to end of rnd.

Rnd 9: Knt to end of rnd.

Rnds 10-14: Repeat rnds 8 & 9, switching to 24 inch circular needles when able. Piece should measure about 3 inches from center at this point. Add new color at beginning or next rnd, cutting previous color yarn. IMPORTANT NOTE: From this point on, increases will continue every other rnd, once in the segment between two markers (eight sections.)

Rnd 15: *P1, inc 1 purlwise, repeat from * to end of rnd.

Rnd 16: Purl to end of rnd.

At this point, you will continue to increase every other rnd for approximately 2 2/3 inches. Switch to third color at this point. Then purl two rnds.

*K1, inc 1, repeat from * to end of round. Knit to end of next round. Continue in this matter for approximately 2 1/2 inches and then cut this yarn and change colors as you desire.

Continue increasing every other round until piece measures approximately 10 inches from center. On the next round without increases leave yarn attached but just hanging there. Now, using waste yarn, knit stitches of first segment from beginnng of round marker. Place these stitches back onto the left needle and pick up original yarn and continue knitting the waste yarn stitches. Knit the next segment (between two markers.) Again, using waste yarn, knit stitches of the next segment between two markers, slip waste stitches back onto left needle and picking up original yarn continue knitting the waste yarn stitches. Knit remaining segments of this round. Measurement from armhole to armhole should be approximately 20 inches.

Continue knitting as before, increasing 1 stitch in each segment every other round until piece measures about two inches from armhole. At beginning of round, switch to Ozark Handspun and continue knitting as before increasing every other round until piece measures about 3 1/2 inches.

Switch back to one of the previous tweed colors and continue knitting as before until piece measures about 10 inches from armhole. Loosely BO sts. Using US size N crochet hook with Ozark Handspun, single crochet around outer edge of circle. Fasten off and bury ends.

Finishing: Using DPNs and carefully removing waste yarn, pick up and knit the armhole stitches with tweed yarn for one row and then loosely bind off. Fasten off and bury ends.

Your finished garment may require a light blocking before wearing. You may add a button if desired or use a shawl pin as a closure.

designed by Janice Rosema for Ozark Handspun, May 2008

Printing Instructions: To print click Ozark Circle Jacket.

Pattern: Ozark Knit Cap and Wristlets

Daughter-in-law Lori with daughter Rylee wearing two different colorways

Description: This crazy hat and wristlet set are a quick and easy knit that results in a flattering look for anyone with the bonus of keeping you warm on a cold day.
Skill Level: Easy
Size: Medium, Large

MATERIALS: 1 Skein Ozark Handspun Yarn

1 Skein Rowan Big Wool

1 Set US size 15 19 inch circular knitting needles

1 US size P crochet hook

1 Tapestry Needle

stitch marker

INSTRUCTIONS:

Hat: Ribbing - Using US size 15 circular needles and Rowan, cast on 36 (40) stitches. Join stitches making sure not to twist yarn, place beginning of row marker.

Row 1: *Knit 2, purl 2, prepat from * to end of row.

Rows 2-16: Repeat row 1. Cut yarn and attach Ozark Handspun.

Rows 17-19: Knit.

Row 20: *Knit 5, knit 2 together, repeat from * to end of row.

Row 21: Knit.

Row 22: *Knit 4, knit 2 together, repeat from * to end of row.

Row 23: Knit.

Row 24: *Knit 3, knit 2 together, repeat from * to end of row.

Row 25: Knit.

Row 26: *Knit 5, knit 2 together, repeat from * to end of row.

Row 27: Knit.

Row 28: Knit, decreasing evenly throughout this row to end up with approximately 10 stitches.

Cut yarn leaving about 8 inches for weaving through the remaining stitches by pulling them through with a crochet hook (if a smaller hook is easier to use for you do so.) Fasten off and bury ends.

Wristlets: Using Us size 15 circular needles and Rowan yarn, cast on 16 stitches.

Row 1: *Knti 2, purl 2, repeat from * until end of row.

Row 2 (WS): *Purl 2, knit 2, repeat from * until end of row.

Rows 3-16: Repeat rows 1 and 2.

Row 17: Loosely bind off in knit-wise fashion. Break off yarn and leave a 5 inch tail.

Knit a second wristlet in the same fashion.

Finishing: Using a tapestry needle and Rowan, tail, sew wrong size edges tohether for about 1 inch. Fasten off and bury ends.

Leaving an opening for the thumb, sew remainder of wristlet together using Rowan. Fasten off and bury ends. Do the same for the other wristlet.

Cuff Edging: Using US size P crochet hook and Ozark Handspun, cingle crochet one or two rows around upper edge of wristlet. Fasten off and bury ends.

designed by Janice Rosema for Ozark Handspun, December 2007

Printing Instructions: To print click Ozark Knit Cap and Wristlets.

Pattern: Ozark Handspun Eco-Capelet

This was featured in the Spring/Summer 2008 issue of Vogue Knitting in their Natural Selection Section

Short Description: This charming little capelet is knitted using Ozark Handspun Yarn in Dark Natural and natural roving which are eco-friendly products. A recycled leather pin was used as a whimsical closure.
Skill Level: Easy
Sizes: One Size fits most.
Finished Measurements: Approximately 43 inches wide by 22 inches long.
Gauge: 1.5 stitches per inch in Stockinette St.
Abbreviations: CO=cast on; K=knit; P=purl; BO=bind off; RS=right side; WS=wrong side; sc=single crochet; dc=double crochet.
Notes or tips: When casting on and binding off, keep tension loose. When crocheting edging, use a relaxed tension.

MATERIALS:
3 Skeins Ozark Handspun Yarn
1 Roll Ozark Handspun Pencil Roving
1 Pair US size 15 Circular knitting needles, 24 inches
1 US size Q crochet hook
1 Recycled pin for closure

INSTRUCTIONS:
Holding one strand of Ozark Handspun pencil roving and one strand of Ozark Handspun together, loosely cast on three stitches.
Row 1: (WSW) Purl.
Row 2: (RS) Increase in first stitch, knit to last stitch. Increase in last stitch.
Rows 3-22: Repeat rows 1 and 2.
Rows 23-26: Increase one stitch at beginning and end of each row.
Row 27: Knit this row until there are 12 stitches remaining.
Row 28: Purl this row until there are 12 stitches remaining.
Row 29: Knit the stitches between the 12 stitches on each end of row.
Row 30: Purl the stitches between the 12 stitches on each end of row.
Row 31: Knit to the end of row (including 12 stitches at end.)
Row 32: Purl to end of row (including 12 stitches at end.)
Row: Break off Ozark Handspun yarn and with remaining strand of Ozark pencil roving, very loosely bind off. Fasten off and bury end.
Crocheted Edging: Using US size Q crochet hook and with wide edge of capelet facing you, attach Ozark Handspun at the corner edge. Chain 2, *dc into next stitch, dc twice into next stitch, repeat from * across to end. This will create a collar for your capelet.
Leaving yarn attached, sc into each stitch around the two edges remaining to finish off. Fasten off and bury ends. Use a recycled pin of your choice to ace as a closure.

designed by Janice Rosema for Ozark Handspun, January 2008

Printing Instructions: To print click Ozark Handspun Eco Capelet.

Pattern: Ozark Knitted Neckwarmer

MATERIALS:

1 Skein Ozark Handspun Yarn or Ozark Handspun Opulent

1 Pair US size 17 knitting needles

1 Large button

1 Needle and thread

Abbreviations: K=knit; p=purl; k2tog=knit 2 together; c0=cast on; b0=bind off; st(s)=stitch(es)

Gauge: Ozark Handspun Yarn=1.5 sts per inch; Ozark Handspun Opulent=3 sts per inch

INSTRUCTIONS:

Using US size 17 needles, co 14 sts loosely. This neckwarmer is knitted in garter stitch.

Knit each row until neckwarmer measures approximately 10 inches.

Next row: k2tog, knit to the last two sts and k2tog (12 sts.)

Continue knitting until skein is almost gone (saving enough to bind off.) Loosely bo. Fasten off and bury ends.

Finishing: Because of the size of needles used and gauge of yarn, no buttonhole is required. attach button to narrow end of the neckwarmer with needle and thread. Slip button through wider end in area that gives you a perfect fit.

designed by Janice Rosema for Ozark Handspun, March 2008

Printing Instructions: To print click Ozark Knitted Neck Warmer.